Description
Pneumatic Push In Air Fittings – Hand Valve 6mm hose. Non-pressure release
there are 2 types of air tap Non Pressure release and Pressure release
The pleasure release tap will release the pressure on the load side while maintaining a seal on the supply side when turned off
The non-pleasure release tap will maintain a seal on the supply and load side when turned off
Australian Stock and in stock ready to ship.
Function
Push tube in to connect push retaining ring to release.
Body is a Rotational Structure for ease of installation.
Pre Teflon coated on threaded versions. Nickel Plated on all metal surfaces.
Range of Application
Compressed Air or Water only (Not other Gasses or Liquids)
Working Pressure: 0~150 PSI / 0~990 kPa
Negative Pressure: -29.5 inch Hg/ -750mm Hg /-750 Torr
Working Temperature: 32~160F / 0~70C
Application: Connect Polyurethane and Nylon Tube
Note:
Remove Dust and Impurities from Hose Before Insertion.
Do not use for other Purposes than Compressed Air or Water only.
Do not Over Tighten Threaded Parts.
